Konrow K-TAB 1004 Firmware

Download Firmware / Flash File For Konrow K-TAB 1004:

Konrow K-TAB 1004 Firmware: If your Konrow K-TAB 1004 phone is corrupt or bricked. Download Konrow K-TAB 1004 stock firmware from here. To get it back to working condition again. 

Advertisement:

All you have to do is simply download the below-given Konrow K-TAB 1004 firmware files and tools on your PC. And then follow the given instruction to install the Stock ROM on Konrow K-TAB 1004 using PhoenixSuit. This guide is also helpful to unroot. Or fix any software malfunctioning problem. 

There are various reasons to flash (Firmware on Konrow K-TAB 1004). 

For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Stock Firmware:

  • Flash Stock ROM to unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Firmware Information:

Device Name: Konrow K-TAB 1004
Type: 
Full ROM
ROM Size: up to 1.8GB
SoC: Allwinner
Os: Android 11 R
Password: Null
Root access: Not
Firmware Version: 
V1
[quads id=2]
Download Links: Firmware Konrow K-TAB 1004
Requirements:
  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  •  Take Full Backup

Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download Konrow K-TAB 1004 Flash Tool And Drivers:
  • A.  Download and install Konrow K-TAB 1004 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

  • B. We use the PhoenixSuit as Konrow K-TAB 1004 Flash Tool because this tool is very efficient and support all kind of MTK phones.

Instructions to Flash Konrow K-TAB 1004 Stock ROM:

  • download & extract Phoenix suit  on your computer
  • Install allwinner driver on your computer
  • download & extract your device firmware on your computer
  • Run the PhoenixSuit.exe file from the PhoenixSuit folder
  • Click Firmware on the top Menu, locate firmware Image (Firmware_version.IMG File)
  • connect You switched off the device to the computer by Pressing the volume up & down key
  • Once You see a data wipe Prompt Select yes Both times, the Download Process started.
  • once done disconnect and switch it on.

Follow Detailed Instruction To Flash Firmware With PhoenixSuit.

[/su_spoiler]

Disclaimer:

  • Please read and understand the Full Guide before flashing “Konrow K-TAB 1004 Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

LEAVE A REPLY

Please enter your comment!
Please enter your name here