Haier W757 v010 Firmware Flash File [Stock ROM]

Haier W757 v010 Firmware

At some point, while using Haier W757 v010, you’ll probably encounter a situation in which you need to flash Haier W757 v010 Firmware. You might need a Haier W757 v010 stock ROM how do you make sure the flashing process goes off without a hitch?

This article contains the Haier W757 v010 Firmware Flash File. That will allow you to recover your Haier W757 v010 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. Besides these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

There are different reasons why we will use Sp Flash Tool to unbrick the Haier W757 v010. I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Haier W757 v010.

The Advantages Of Haier W757 v010 Stock ROM:

  • Flash Stock To Unbrick your Haier W757 v010
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Haier W757 v010
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Haier W757 v010
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Haier W757 v010 Stock ROM Details:

Gapps File Included
Device Supported Haier W757 v010
Tool Supported SP Flash Tool
Processor MediaTek
Os Android
Download Haier_W757_SW_S98045D4_V010_RU_MTS_0103.zip

Pre-requirements to Install Haier W757 v010 Firmware:

  • Supported Phone: Haier W757 v010
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Haier W757 v010 Backup:

Download Haier W757 v010 Flashing Tool And Drivers:

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Haier W757 v010 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM Haier W757 v010 must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Haier W757 v010 Firmware:

1. Download Haier W757 v010 Firmware zip file given above and extract it in your computer.

2. Download Haier W757 v010 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Haier W757 v010 smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Haier W757 v010 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed Haier W757 v010 stock ROM on your  Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow Detailed Instruction Haier W757 v010 Firmware Flashing With Sp Flash Tool.

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close