Galaxy S6 SM-G920I U4 Firmware – G920IDVS4FTJ8
The specific Galaxy S6 SM-G920I U4 Firmware Download Package has a Stock ROM of Galaxy S6 SM-G920I U4 Security Patch Level 2019-08-01 (August 1, 2019). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy S6 SM-G920I Binary 4 Android 7.0 Nougat Brazil ZTO – G920IDVS4FTJ8
There are various reasons to flash “Stock Firmware on Galaxy S6 SM-G920I U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy S6 SM-G920I U4
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy S6 SM-G920I U4 Stock ROM Details:
SM-G920I U4 Brazil ZTO – G920IDVS4FTJ8:
| Model | SM-G920I Binary 4 U4, S4, Bit 4 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android version | Android 7.0 Nougat |
| Operator / Carrier | Clean ZTO (no logo, carrier apps) |
| PDA | G920IDVS4FTJ8 |
| CSC | G920IZTO4FTJ1 |
| MODEM CP Version | G920IDVU4FSJ2 |
| product code | ZTO |
| Build Date | 26 Oct 2020 |
| Security Patch Level | 2019-08-01 (August 1, 2019) |
| Size | 2.5 |
| Download | Google Drive | Android File Host |
How To Install Galaxy S6 SM-G920I U4 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy S6 SM-G920I U4 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy S6 SM-G920I U4 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S6 SM-G920I U4 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
