Galaxy S20+ SM-G985F Binary 8 Firmware

The specific Galaxy S20+ SM-G985F U8 Firmware Download Package has a Stock ROM of Galaxy S20+ SM-G985F U8 Security Patch Level 2021-07-01 (June 1, 2021). This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy S20+ SM-G985F Binary 8 Android 11 R Brazil ZTO – G985FXXU8DUF9

There are various reasons to flash “Stock Firmware on Galaxy S20+ SM-G985F U8“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy S20+ SM-G985F U8 Stock ROM Details:

SM-G985F U8 Brazil ZTO – G985FXXU8DUF9:

- Advertisement -
Model SM-G985F Binary 8 U8, S8, Bit 8
Region / Country Brazil
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean ZTO (no logo, carrier apps)
PDA G985FXXU8DUF9
CSC G985FOWO8DUG1
product code ZTO
Build Date 2021-07-13
Security Patch Level 2021-07-01 (June 1, 2021)
Size 5.8 GB
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy S20+ SM-G985F U8 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy S20+ SM-G985F U8 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode a Warning Yellow Triangle Sign appeares . Press Volume Up to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy S20+ SM-G985F U8 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S20+ SM-G985F U8 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.