Galaxy S10+ SM-G975F U14 Firmware – Android 11 R
The specific Galaxy S10 Plus SM-G975F Firmware Download Package comes with a Stock ROM of Galaxy S10 Plus SM-G975F Security Patch Level 2022-03-01 (March 1, 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy S10+ SM-G975F Binary 14 Android 12 Brazil ZTO G975FXXUEHVC6
There are various reasons to flash “Stock Firmware on Galaxy S10 Plus SM-G975F“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy S10 Plus SM-G975F
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy S10 Plus SM-G975F Stock ROM Details:
SM-G975F U14 Brazil ZTO G975FXXUEHVC6:
Model | SM-G975F Binary 14 U14, S14, Bit 14 |
Region/ Country | Brazil |
Language | Multi-Language |
Android version | Android 12 S |
Operator / Carrier | Clean ZTO (no logo, carrier apps) |
AP / PDA | G975FXXUEHVC6 |
CSC | G975FOWOEHVC6 |
MODEM CP Version | G975FXXUEHVB9 |
product code | ZTO |
Build Date | 2022-03-07 |
Security Patch Leve | 2022-03-01 (March 1, 2022) |
Size | 5.3 GB |
Download | Google Drive | Android File Host |
How To Install Galaxy S10 Plus SM-G975F Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy S10 Plus SM-G975F Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is done, a Green Box with “Pass” will appear in Odin. The Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy S10 Plus SM-G975F finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S10 Plus SM-G975F Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of information in this guide.
- Phone must have a 70–80% charge.