The specific Galaxy S10+ SC-04L U1 Firmware Download Package comes with a Stock ROM of Galaxy S10+ SC-04L U1 ADD DATE 2022-03-15. This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy S10+ SC-04L Binary 1 Firmware – Android 12 S – DCM – SC04LOMU1DVB5 – Japan
There are various reasons to flash “Stock Firmware on Galaxy S10+ SC-04L U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
]
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy S10+ SC-04L U1
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy S10+ SC-04L U1 Stock ROM Details:
SC-04L U1 Firmware – DCM – SC04LOMU1DVB5 – Japan:
Model | SC-04L Binary 1 U1, S1, Bit 1 |
Region / Country | Japan |
Language | Multi-Language |
Android version | Android 12 S |
Operator / Carrier | clear |
PDA | SC04LOMU1DVB5 |
CSC | SC04LDCM1DVB5 |
MODEM CP Version | SC04LDCM1DVB5 |
product code | DCM |
Build Date | 20220217115101 |
ADD DATE | 2022-03-15 |
Size | 5.62 GB Full Files |
Download | Google Drive | Android File Host |
How To Install Galaxy S10+ SC-04L U1 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy S10+ SC-04L U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message at the lower-left panel.
8: Once Odin detects your Device, click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you can see a Green Box with Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your Device may take some time to reboot but don’t be alarmed.
You should run your desired firmware when your Galaxy S10+ SC-04L U1 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S10+ SC-04L U1 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your Device resulting from using the information in this guide.
- Phone must have a 70–80% charge.