The specific Galaxy Note 9 SM-N9600 U7 Firmware Download Package comes with a Stock ROM of Galaxy Note 9 SM-N9600 U7 Security Patch Level 2021-03-01 (March 1, 2021). This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy Note 9 SM-N9600 Binary 7 Android 10 Q Brazil ZTO – N9600ZHS7FUC6
There are various reasons to flash “Stock Firmware on Galaxy Note 9 SM-N9600 U7“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Prerequisites:
- Supported Phone: Galaxy Note 9 SM-N9600 U7
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy Note 9 SM-N9600 U7 Stock ROM Details:
SM-N9600 U7 Brazil ZTO – N9600ZHS7FUC6:
| Model | SM-N9600 Binary 7 U7, S7, Bit 7 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android version | Android 10 Q |
| Operator / Carrier | Clean ZTO (without logo, operator apps) |
| PDA | N9600ZHS7FUC6 |
| CSC | N9600OWO7EUB3 |
| MODEM / CP Version | N9600ZCS7EUB2 |
| Product code | ZTO |
| Build Date | 11 Mar 2021 |
| Security Patch Level | 2021-03-01 (March 1, 2021) |
| Size | 4.1 GB |
| Download | Google Drive | Android File Host |
How To Install Galaxy Note 9 SM-N9600 U7 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy Note 9 SM-N9600 U7 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is done, a Green Box with “Pass” will appear in Odin. The Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy Note 9 SM-N9600 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy Note 9 SM-N9600 U7 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.
