Stock Firmware

Galaxy M30 SM-M305M U5 Firmware – M305MUBS5CTG4

Galaxy M30 SM-M305M Binary 5 Firmware

The specific Galaxy M30 SM-M305M U5 Firmware Download Package has a Stock ROM of Galaxy M30 SM-M305M U5 Security Patch Level 2020-07-01 (1 July 2020). This helps bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy M30 SM-M305M Binary 5 Android 10 Q – M305MUBS5CTG4

There are various reasons to flash “Stock Firmware on Galaxy M30 SM-M305M U5“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.


Galaxy M30 SM-M305M U5 Stock ROM Details:

SM-M305M U5  M305MUBS5CTG4:

Model SM-M305M Binary 5 U5, S5, Bit 5
Region / Country: Brazil
Language: Multi-Language
Android version: Android 10 Q
Operator: Clean ZTO (without logo, operator apps)
Product code: ZTO
Build Date: Sat, 25 Jul 2020
Security Patch Level: 2020-07-01 (1 July 2020)
Size: 3 GB
Download 4File Google Drive Android File Host

How To Install Galaxy M30 SM-M305M U5 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If Samsung USB Driver is installed on your computer, Skip this Step.

2: Download and extract the [highlight color=”yellow”]Galaxy M30 SM-M305M U5 Firmware[/highlight] files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

You should run your desired firmware when your Galaxy M30 SM-M305M U5 finally boots up.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”


  • Please read and understand the Full Guide before flashing “Galaxy M30 SM-M305M U5 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Related Articles

Back to top button