Galaxy M13 SM-M135M/DS U4 Firmware – Android 13 T
If you own a Galaxy M13 SM-M135M/DS smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy M13 SM-M135M/DS U4 With 2024-01-01 (January 1, 2024) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy M13 SM-M135M Binary 4 Android 14 Panama TPA M135MUBS4DXA2
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on Galaxy M13 SM-M135M/DS U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Preparation:
- Supported Phone: Galaxy M13 SM-M135M/DS U4
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy M13 SM-M135M/DS U4 Stock Firmware:
Download Galaxy M13 SM-M135M/DS U4 Latest Firmware:
SM-M135M U4 Panama TPA M135MUBS4DXA2:
Model / Device | SM-M135M Binary 4 U4, S4, Bit 4 |
Region / Country | Panama |
Language | Multi-Language |
Android Version | Android 14 U |
Operator / Carrier | Clear TPA (without logo, operator apps) |
AP/PDA | M135MUBS4DXA2 |
CSC | M135MOWO4DXA1 |
Modem CP Version / Baseband | M135MUBU4DXA1 |
Product code | TPA |
Build / Release Date | 2024-02-05 |
Security Patch Level | 2024-01-01 (January 1, 2024) |
Size | 3.8GB |
Download | Google Drive |
Downgrade Firmware For SM-M135M/DS:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy M13 SM-M135M/DS U4 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy M13 SM-M135M/DS U4 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue to encounter problems, you may need to perform a factory reset on your device.
Conclusion
Installing the latest firmware on your Galaxy M13 SM-M135M/DS U4 can bring several improvements to your device, including bug fixes and new features. If you follow the steps outlined in this guide, you should be able to update your device to the latest firmware version successfully. If you encounter any problems during the installation process, refer to the troubleshooting section of this guide for help.
Must Read:
- 7 Tips to increase Samsung Galaxy battery life
- Remove the black bar from the Samsung keyboard
- Disable the camera geotag on Samsung phones
- Steps To Record The Samsung Galaxy Screen
- Fix Moisture Detected on Samsung
- Download USB Drivers for Samsung Mobiles
- KnoxPatch: LSPosed Module to Restore Samsung Knox Features