If you own a Galaxy M13 SM-M135M/DS U3 smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy M13 SM-M135M/DS U3 With 2023-05-01 (May 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy M13 SM-M135M/DS Binary 3 Android 13 Brazil ZTO M135MUBU3CWF1
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on Galaxy M13 SM-M135M/DS U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Preparation:
- Supported Phone: Galaxy M13 SM-M135M/DS U3
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy M13 SM-M135M/DS U3 Stock Firmware:
Download Galaxy M13 SM-M135M/DS U3 Latest Firmware:
SM-M135M/DS U3 Brazil ZTO M135MUBU3CWF1:
Model | SM-M135M/DS Binary 3 U3, S3, Bit 3 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 13 T One UI 5.1 Update |
Operator / Carrier | Clean ZTO (no logo, carrier apps) |
AP / PDA | M135MUBU3CWF1 |
CSC | M135MOWO3CWF1 |
Modem CP Version / Baseband | M135MUBU3CWF1 |
product code | ZTO |
Model References | SM-M135MZGSZTO, SM-M135MLBSZTO, SM-M135MIDSZTO, SM-M135MLBGZTO |
Build Date | 2023-06-07 |
Security Patch Level | 2023-05-01 (May 1, 2023) |
Size | 3.6GB |
Download | Google Drive |
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy M13 SM-M135M/DS U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is completed, you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy M13 SM-M135M/DS U3 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue to encounter problems, you may need to perform a factory reset on your device.
Conclusion
Installing the latest firmware on your Galaxy M13 SM-M135M/DS U3 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.