SM-M105M Binary 8 Firmware

The specific Galaxy M10 SM-M105M U8 Firmware Download Package comes with a Stock ROM of Galaxy M10 SM-M105M U8 Security Patch Level 2022-06-01 – June 1, 2022. This helps bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy M10 SM-M105M Android 10 Q Binary 8 M105MUBU8CVF2

There are various reasons to flash “Stock Firmware on Galaxy M10 SM-M105M U8“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade, remove and unlock FRP
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-requirements:

Galaxy M10 SM-M105M U8 Stock ROM Details:

Galaxy M10 SM-M105M Android 10 Q Binary 8 M105MUBU8CVF2:

Model SM-M105M Binary 8 U8, S8, Bit 8
Region / Country Brazil
Language Multi-Language
Android version Android 10 Q
Operator / Carrier Clean ZTO – no logo, carrier apps
AP / PDA M105MUBU8CVF2
CSC M105MOWO8CVF2
CP Version / Baseband Modem M105MUBU8CVF2
product code ZTO
Build Date / Upload 2022-06-02 / 5 Jul 22
Security Patch Level 2022-06-01 – June 1, 2022
Size 2.3 GB
Advertisements
Brazil – ZTO Mega  Google Drive
Argentina – rim Mega Google Drive
Chile – CHO Mega MediaFire
ARO – Argentina Google Drive

How To Install Galaxy M10 SM-M105M U8 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

Advertisements

2: Download and extract the  Galaxy M10 SM-M105M U8 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.

Advertisements

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed, you can see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy M10 SM-M105M U8 finally boots up, you should run your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

Advertisements
  • Please read and understand the Full Guide before flashing “Galaxy M10 SM-M105M U8 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Write A Comment