Galaxy J2 Core SM-J260MU/DS U1 Firmware – Android 8 Oreo
The specific Galaxy J2 Core SM-J260MU/DS U1 Firmware Download Package comes with a Stock ROM of Galaxy J2 Core SM-J260MU/DS U1 Security Patch Level 2020-12-01 (December 1, 2020). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy J2 Core SM-J260MU/DS Binary 1 Android 8.1.0 Oreo Brazil ZTO J260MUUBS1AVK1
There are various reasons to flash “Stock Firmware on Galaxy J2 Core SM-J260MU/DS U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy J2 Core SM-J260MU/DS U1
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy J2 Core SM-J260MU/DS U1 Stock ROM Details:
SM-J260MU/DS U1 Brazil ZTO J260MUUBS1AVK1:
Model | SM-J260MU/DS Binary 1 U1, S1, Bit 1 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 8.1.0 Oreo |
Operator / Carrier | Clean ZTO (no logo, carrier apps) |
AP / PDA | J260MUUBS1AVK1 |
CSC | J260MUOWO1ATE1 |
Modem CP Version / Baseband | J260MUUBU1ATE1 |
product code | ZTO |
Build Date | 2022-11-10 |
Security Patch Level | 2020-12-01 (December 1, 2020) |
Size | 933 MB |
Download | Mega | Google Drive |
How To Install Galaxy J2 Core SM-J260MU/DS U1 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy J2 Core SM-J260MU/DS U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is completed you can see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy J2 Core SM-J260MU/DS U1 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy J2 Core SM-J260MU/DS U1 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.