The specific Galaxy A71 5G SM-A716U U6 Firmware Download Package has a Stock ROM of Galaxy A71 5G SM-A716U U6 Security Patch Level January 2022. This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A71 5G SM-A716U Binary 6 Firmware – Android 11 R – SPR – A716USQU6DVA2 – United States
There are various reasons to flash “Stock Firmware on Galaxy A71 5G SM-A716U U6“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
Suppose you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Galaxy A71 5G SM-A716U U6 Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A71 5G SM-A716U U6
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy A71 5G SM-A716U U6 Stock ROM Details:
Model | SM-A716U Binary 6 U6, S6, Bit 6 |
Region / Country | United States |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Carrier | Clean (no logo, carrier apps) |
PDA | A716USQU6DVA2 |
CSC | A716UOYN6DVA2 |
MODEM CP Version | United States |
product code | SPR |
Build Date | 20220120105050 |
Security Patch Level | 2022-01-01 (January 2022) |
Size | 5.39 GB Full Files |
Download | Google Drive | Android File Host |
How To Install Galaxy A71 5G SM-A716U U6 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, Skip this Step.
2: Download and extract the Galaxy A71 5G SM-A716U U6 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message at the lower-left panel.
8: Once Odin detects your Device, click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. It Your Devicey take some time forreboot, but don’t be alarmed.
When your Galaxy A71 5G SM-A716U U6 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A71 5G SM-A716U U6 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your Device resulting from using the information in this guide.
- Phone must have a 70–80% charge.