The specific Galaxy A50 SM-A505GT U7 Firmware Download Package has a Stock ROM of Galaxy A50 SM-A505GT U7 Security Patch Level 2021-02-01 (February 1, 2021). This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy A50 SM-A505GT Binary 7 Android 10 Q Brazil ZTO – A505GTUBS7BUB1
There are various reasons to flash “Stock Firmware on Galaxy A50 SM-A505GT U7“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Prerequisites:
- Supported Phone: Galaxy A50 SM-A505GT U7
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A50 SM-A505GT U7 Stock ROM Details:
SM-A505GT U7 Brazil ZTO – A505GTUBS7BUB1:
| Model | SM-A505GT Binary 7 U7, S7, Bit 7 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android version | Android 10 |
| Operator / Carrier | Clean ZTO (without logo, operator apps) |
| PDA | A505GTUBS7BUB1 |
| CSC | A505GTOWO7BUB1 |
| MODEM / CP Version | A505GDXS7BUB2 |
| Product code | ZTO |
| Build Date | 16 Feb 2021 |
| Security Patch Level | 2021-02-01 (February 1, 2021) |
| Size | 3.7 GB |
| Download | Google Drive | Android File Host |
How To Install Galaxy A50 SM-A505GT U7 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A50 SM-A505GT U7 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
You should run your desired firmware when your Galaxy A50 SM-A505GT U7 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A50 SM-A505GT U7 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.
