The specific Galaxy A32 SM-A325N U1 Firmware Download Package comes with a Stock ROM of Galaxy A32 SM-A325N U1 Security Patch Level 2021-08-01. This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A32 SM-A325N Binary 1 Firmware – A325NKSU1BVG1 – Android 12 S
There are various reasons to flash “Stock Firmware on Galaxy A32 SM-A325N U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update Downgrade remove FRP
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A32 SM-A325N U1
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A32 SM-A325N U1 Stock ROM Details:
SM-A325N U1 Firmware – A325NKSU1BVG1 – Android 12 S:
Model | SM-A325N Binary 1 U1, S1, Bit 1 |
Region / Country | South Korea |
Language | Multi-Language |
Android version | Android 12 s |
Operator / Carrier | Clean (no logo, carrier apps) |
AP / PDA | S901NKSU2AVFA |
CSC | S901NOKR2AVFA |
CP Version / Baseband Modem | – |
product code | SKC |
Build Date | 20220706114321 |
Security Patch Level | – |
Size | 5.8 GB Full Files |
SKC | Google Drive |
How To Install Galaxy A32 SM-A325N U1 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy A32 SM-A325N U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy A32 SM-A325N U1 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A32 SM-A325N U1 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.
- Phone must have a 70–80% charge.