By | April 2, 2024

Galaxy A14 SM-A145F U3 Firmware
If you own a Galaxy A14 SM-A145F smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A14 SM-A145F U3 With 2023-07-01 (July 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy A14 SM-A145F Binary 3 Android 13 South Africa XFE A145FXXU3AWG5

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy A14 SM-A145F U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.


How To Install Galaxy A14 SM-A145F U3 Stock Firmware:

Download Galaxy A14 SM-A145F U3 Latest Firmware:

SM-A145F U3 South Africa XFE A145FXXU3AWG5:

Model SM-A145F Binary 3 U3, S3, Bit 3
Region / Country South Africa
Language Multi-Language
Android OS Version Android 13 T
Operator / Carrier Clean XFE (without logo, operator apps)
Modem CP Version / Baseband A145FXXU3AWG5
Product code XFE
Build / Release Date 2023-09-04
Security Patch Level 2023-07-01 (July 1, 2023)
Size 4.4GB
Download Google Drive

1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.


2: Download and extract the  Galaxy A14 SM-A145F U3 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.


5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.


9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy A14 SM-A145F U3 finally boots up, you should be running your desired firmware.


To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”


If you encounter any problems during the firmware update process, here are a few things you can try:

  1. Restart your device and retry the installation process.
  2. Ensure your device has sufficient battery.
  3. If you continue to encounter problems, you may need to perform a factory reset on your device.


Installing the latest firmware on your Galaxy A14 SM-A145F U3 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.

Leave a Reply

Your email address will not be published. Required fields are marked *