The specific Galaxy A13 SM-A135U U1 Firmware Download Package comes with a Stock ROM of Galaxy A13 SM-A135U U1 Build Date 2022-02-28. This helps you to bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy A13 SM-A135U Binary 1 Firmware – Android 12 S – VZW – A135USQU1AVB9 – United States
There are various reasons to flash “Stock Firmware on Galaxy A13 SM-A135U U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy A13 SM-A135U U1
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy A13 SM-A135U U1 Stock ROM Details:
SM-A135U U1 VZW – A135USQU1AVB9 – United States:
Model | SM-A135U Binary 1 U1, S1, Bit 1 |
Region / Country | United States |
Language | Multi-Language |
Android version | Android 12 S |
Operator / Carrier | Clean (no logo or carrier apps) |
AP / PDA | A135USQU1AVB9 |
CSC | A135UOYN1AVB9 |
CP Version / Base Band Modem | A135USQU1AVB9 |
product code | VZW |
Build Date | 2022-02-28 |
Changelist | 23770769 |
Size | 4.07GB Full Files |
Download | Google Drive | Android File Host |
How To Install Galaxy A13 SM-A135U U1 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A13 SM-A135U U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A13 SM-A135U U1 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A13 SM-A135U U1 Firmware“.
- Use these instructions at your own risk.
- Phone must have a 70–80% charge.