Galaxy A12 SM-A125M/DS U3 Firmware – Android 12 S
The specific Galaxy A12 SM-A125M/DS U3 Firmware Download Package comes with a Stock ROM of Galaxy A12 SM-A125M/DS U3 Security Patch Level 2022-09-01 (September 1, 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A12 SM-A125M/DS Binary 3 Android 12 Brazil ZTO A125MUBS3CVH3
There are various reasons to flash “Stock Firmware on Galaxy A12 SM-A125M/DS U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy A12 SM-A125M/DS U3
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A12 SM-A125M/DS U3 Stock ROM Details:
SM-A125M/DS U3 Brazil ZTO A125MUBS3CVH3:
Model | SM-A125M/DS Binary 3 U3, S3, Bit 3 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 12 S |
Operator / Carrier | Clean ZTO (no logo, carrier apps) |
AP / PDA | A125MUBS3CVH3 |
CSC | A125MOWO3CVH3 |
CP Version / Baseband Modem | A125MUBU3CVH1 |
product code | ZTO |
Build Date | 2022-08-23 |
Security Patch Level | 2022-09-01 (September 1, 2022) |
Size | 4.3 GB |
Brazil – ZTO | Google Drive | Mega |
Brazil – Vivo ZVV | Google Drive | Mega |
Brazil – Claro ZTA | Google Drive | Mega |
How To Install Galaxy A12 SM-A125M/DS U3 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A12 SM-A125M/DS U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A12 SM-A125M/DS U3 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A12 SM-A125M/DS U3 Firmware“.
- Use these instructions at your own risk.
- Phone must have a 70–80% charge.