The specific Galaxy A10s SM-A107M U6 Firmware Download Package comes with a Stock ROM of Galaxy A10s SM-A107M U6 Security Patch Level 2023-05-01 (March 1, 2023). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A10s SM-A107M Binary 6 Android 11 Mexico MXO A107MUBU6CWE1
There are various reasons to flash “Stock Firmware on Galaxy A10s SM-A107M U6“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Sted Phone: Galaxy A10s SM-A107M U6
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: Tcharge to execute this installation, you must use a PC or Laptop.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A10s SM-A107M U6 Stock ROM Details:
SM-A107M U6 Mexico MXO A107MUBU6CWE1:
| Model | SM-A107M Binary 6 U6, S6, Bit 6 |
| Region / Country | Mexico |
| Language | Multi-Language |
| Android version | Android 11 R |
| Operator / Carrier | Cleans MXO (no logo, carrier apps) |
| AP / PDA | A107MUBU6CWE1 |
| CSC | A107MOWO6CWE1 |
| Modem CP Version / Baseband | A107MUBU6CWE1 |
| product code | MXO |
| Build Date | 2023-05-17 |
| Security Patch Level | 2023-05-01 (March 1, 2023) |
| Size | 3.1GB |
| Download | Google Drive |
Other Firmware For SM-A107M:
- Samsung Galaxy A10s SM-A107M U3 Firmware
- Samsung Galaxy A10s SM-A107M U 4 Firmware
- Galaxy A10s SM-A107M U5 Firmware
How To Install Galaxy A10s SM-A107M U6 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is installed on your computer, Skip this Step.
2: Download and extract the Galaxy A10s SM-A107M U6 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message at the lower-left panel.
8: Once Odin detects your Device, click on the PDA button, and select the Firmware.tar file.
9ow, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time fo reboot, but don’t be alarmed.
When your Galaxy A10s SM-A107M U6 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A10s SM-A107M U6 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your Device resulting from using the information in this guide.
- Phone must have a 70–80% charge.
