If you own an SM-A035M/DS smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the SM-A035M/DS U3 With 2023-07-01 (July 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy A03 SM-A035M/DS Binary 3 Android 13 Brazil Vivo ZVV A035MUBU3CWF7
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on SM-A035M/DS U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Preparation:
- Supported Phone: SM-A035M/DS U3
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
How To Install SM-A035M/DS U3 Stock Firmware:
Download SM-A035M/DS U3 Latest Firmware:
SM-A035M/DS U3 Brazil Vivo ZVV A035MUBU3CWF7:
Model | SM-A035M Binary 3 U3, S3, Bit 3 |
Region / Country | Brazil |
Language | Multi Language |
Android Version | Android 13 T One UI Core 5.1 Update |
Operator / Carrier | Live ZVV |
AP / PDA | A035MUBU3CWF7 |
CSC | A035MOWO3CWF7 |
Modem CP Version / Baseband | A035MUBU3CWF7 |
Product code / Product Code | ZVV |
Build / Release Date | 2023-07-25 |
Security Patch Level | 2023-07-01 (July 1, 2023) |
Size | 4.6GB |
Brazil Live ZVV | Google Drive |
Brazil Claro ZTA | Google Drive |
Brazil ZTO | Mega Google Drive |
Brazil Tim ZTM | Google Drive |
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the SM-A035M/DS U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your SM-A035M/DS U3 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”SM-A035M/DS U3 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue to encounter problems, you may need to perform a factory reset on your device.
Conclusion
Installing the latest firmware on your SM-A035M/DS U3 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.