|

Galaxy A02s SM-A025M/DS U6 Firmware – Android 12 S

Galaxy A02s SM-A025M/DS

If you own a Galaxy A02s SM-A025M/DS U6 smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A02s SM-A025M/DS U6 With 2023-04-01 (April 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy A02s SM-A025M/DS Binary 6 Android 12 Brazil ZTO A025MUBU6CWE1

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy A02s SM-A025M/DS U6“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Preparation:

How To Install Galaxy A02s SM-A025M/DS U6 Stock Firmware:

Download Galaxy A02s SM-A025M/DS U6 Latest Firmware:

SM-A025M/DS U6 Brazil ZTO A025MUBU6CWE1:

Model SM-A025M/DS Binary 6 U6, S6, Bit 6
Region / Country Brazil
Language Multi-Language
Android version Android 12 S
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA A025MUBU6CWE1
CSC A025MOWO6CWE1
Modem CP Version / Baseband A025MUBU6CWE1
product code ZTO
Model References SM-A025MZBVZTO, SM-A025MZKVZTO, SM-A025MZRVZTO, SM-A025MZBYZTO, SM-A025MZKYZTO, SM-A025MZRYZTO
Build Date 2023-05-23
Security Patch Level 2023-04-01 (April 1, 2023)
Size 3.7GB
[quads id=2]
Brazil ZTO Google Drive
Brazil Claro ZTA Mega    Google Drive
Brazil Vivo ZVV Mega    Google Drive
Brazil TIM ZTM Mega    Google Drive

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy A02s SM-A025M/DS U6 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy A02s SM-A025M/DS U6 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Troubleshooting

If you encounter any problems during the firmware update process, here are a few things you can try:

  1. Restart your device and retry the installation process.
  2. Ensure your device has sufficient battery.
  3. If you continue to encounter problems, you may need to perform a factory reset on your device.

Conclusion

Installing the latest firmware on your Galaxy A02s SM-A025M/DS U6 can bring several improvements to your device, including bug fixes and new features. If you follow the steps outlined in this guide, you should be able to update your device to the latest firmware version successfully. If you encounter any problems during the installation process, refer to the troubleshooting section of this guide for help.

Leave a Reply

Your email address will not be published. Required fields are marked *