Follow Detailed Instruction Movic S5501 Firmware Flashing With Sp Flash Tool.
Movic S5501 Firmware Flash File [Stock ROM]
If you own Movic S5501 and looking for Movic S5501 Firmware. ADB Driver, and Fastboot Driver suitable for your device. then this is the right place to download Movic S5501 ADB Driver, Android USB Driver and Fastboot Drivers. Sometimes users brick their devices when rooting.
And the only way to fix that is by flashing back the Movic S5501 stock firmware. Movic S5501 Stock Firmware is an application and operating system that control. How Movic S5501 operates, and it flashed into Movic S5501 phone’s ROM. This article contains the Movic S5501 Firmware Flash File.
Movic S5501 Firmware Flash File [Stock ROM]
That will allow you to recover your Movic S5501 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version.
You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.
We will use Sp Flash Tool to unbrick the Movic S5501 as we use for Movic W3. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Movic S5501.
The Advantages Movic S5501 Firmware:
- Flash Stock To Unbrick your Movic S5501
- Fix boot loop issue
- Update and Downgrade Movic S5501
- Unroot or Fix Bugs
- To solve the lag or stutter on Movic S5501
- Fix software issues.
- Return to stock for warranty coverage.
Movic S5501 Firmware Details:
- Gapps File: Included
- Device Supported: Movic S5501
- Tool Supported: SP Flash Tool
- Processor: MediaTek MT6580
- Os: Android 8.0 Oreo
Download
Pre-requirements to Install Movic S5501 Firmware:
- Supported Phone: Movic S5501
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
Take Phone Backup:
Movic S5501 Flashing Tool And Drivers:
- Movic S5501 Flash Tool: Download the latest SP Flash tool and extract it (Install)
- Movic S5501 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
- Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)
Disclaimer:
- Please read and understand the Full Guide Before Flashing Movic S5501 Stock ROM.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Instructions to Install Movic S5501 Firmware:
Step 1: Extract And Run SP flash tool.
Step 2: Install MTK android USB drivers.
Step 3: Then download Movic S5501 Firmware.
Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
Step 5: Now open SP flash tool.exe.
Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.
Step 7: In the download tab, click on the scatter load button.
Step 8: After locating the scatter tab, click on the download button.
Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
Step 10: When flashing is completed, a green ring will appear in the SP flash tool.
Step 11: Close the SP flash tool on your computer and unplug the phone.
Step 12: Power on the phone and enjoy it.
Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
