Asus Zenfone GO ZEB552KL-ZX007D Firmware

 

The specific Asus Zenfone GO ZEB552KL-ZX007D Firmware comes with a Stock ROM of Asus Zenfone GO ZEB552KL-ZX007D. This helps you to bypass FRP lock and revert form root and custom ROM.

Why would you want to flash Firmware on your Asus Zenfone GO ZEB552KL-ZX007D?

There are various reasons to flash (Firmware on Asus Zenfone GO ZEB552KL-ZX007D).

For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Asus Zenfone GO ZEB552KL-ZX007D Firmware:

  • Flash Stock ROM to unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Asus Zenfone GO ZEB552KL-ZX007D Firmware Details:

  • Gapps: Included
  • Device Supported: Asus Zenfone GO ZEB552KL-ZX007D
  • Tool Supported: Asus Flash Tool
  • Os:

Download:

Asus Zenfone GO ZEB552KL V.13.0.4.76 Download
Asus Zenfone GO ZEB552KL V.13.0.4.51 Download
Asus Zenfone GO ZEB552KL New Version Download

Pre-requirements to Flash Asus Zenfone GO ZEB552KL-ZX007D Stock ROM

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing or updating the firmware.

Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Update

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Asus Zenfone GO ZEB552KL-ZX007D Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Asus Zenfone GO ZEB552KL-ZX007D must have a 70–80% charge.

Method 1: Upgrade Asus Zenfone GO ZEB552KL-ZX007D Stock Firmware via Recovery

1. Download the Asus Zenfone GO ZEB552KL-ZX007D Stock Firmware file from the Lenovo_Vibe_K6_K33b36_S150_161114_ROW_QPST.zip/file given above and move it to your device storage.

2. Now, enter the device into the recovery mode.

3. Switch off your phone > Hold and Long press Power button + Volume Up and your device will boot into recovery mode.

4. Now, in the recovery menu, select the option Apply update from sd card.

5. Choose Asus Zenfone GO ZEB552KL-ZX007D Stock Firmware update.zip OTA firmware file which you’ve downloaded and moved earlier.

6. Wait for some time to complete the installation process.

7. Finally, reboot your phone to complete the process.

You’re done.

Method 2: Upgrade Asus Zenfone GO ZEB552KL-ZX007D Stock Firmware Using ADB Sideload

1. First of all enable the Developer Option, To Enable the Developer Option, Go to your Settings -> About Phone -> Software Information -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled

2. Go back to settings -> Now you need to enable the USB Debugging by going to Settings -> Developer Option and Enable USB Debugging.

3. After enabling USB Debugging, In your PC Download and Extract the Downloaded ADB fast boot Zip file.

4. Now connect your phone to the Computer using USB Cable.

5. When you connect your Phone to Computer, please wait until all the drivers get installed.

6. In your ADB fastboot folder, open a command prompt window by pressing Shift Key + Right Mouse Click

7. Now type the command in your command window

adb devices

8. If you see a pop up to allow USB Debugging on your phone, Click OK

9. Now type the command below to reboot your phone to recovery mode.

10. In your recovery mode, open the ADB Sideload option,

In TWRP,  Advanced –> ADB Sideload

CWM,  Install –> Install Zip from Sideload

11. In your computer, move the Asus Zenfone GO ZEB552KL-ZX007D Stock Firmware.zip file that you want to sideload to your phone to the ADB Fastboot folder.

12. Now execute the below command in CMD screen.

adb sideload Filename.zip

Wait until the Installation process Completes.

Once the installation completed. Reboot the Phone.

Method 3: Upgrade Asus Zenfone GO ZEB552KL-ZX007D Stock ROM via Asus Flash Tool

1. The very first thing which you need to do is to download the Asus flash tool 32/64 bit.

Click here to download the Asus Flash Tool.

2. And then install the Asus flash tool by following the wizard of the application.

3. Once the application gets installed on your Windows/Linux computer. Then launch/open the application.

4. Now you need to download the Asus Zenfone GO ZEB552KL-ZX007D Stock ROM or Asus Zenfone GO ZEB552KL-ZX007D raw firmware and then extract the file to your Windows/Linux PC.

5. Next, you need to boot your Asus Zenfone GO ZEB552KL-ZX007D into the recovery/bootloader mode.

[Just press Power off the + press & hold power down + press and hold power up.

6. If your device does not get into the recovery mode. It means your device has the other methods to get into the recovery method. Just make a google search for “how to boot into the recovery mode {your device name}.

7. Once your device gets into the recovery mode. Then connect your device to your computer via USB cable.

Note: Asus flash tool will automatically install the necessary driver.

8. If your device is connected to your PC then you may see a blue state signal and a serial number. see the below image.

9. Now you need to select Asus Zenfone GO ZEB552KL-ZX007D Stock ROM and also select your device’s model.

10. Once you select your device model and firmware You have to click on “start” (Located inside the Settings option, left-hand side upper corner).

11. Now the flashing will automatically start to your device. You need to wait until the flashing gets completed.

12. Once the flashing gets completed you can see “Flash Image successfully” on the screen (at Asus flash tool).

That’s it. Your Asus device will automatically reboot. Now unplug the USB cable from the computer and enjoy it.

Thanks. I hope that the above step by step guide helped you to flash your device using the Asus flash tool. You can comment below if you are unable to flash your Asus device.

Write A Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.