The specific Galaxy S9 SM-G960F U11 Firmware Download Package comes with a Stock ROM of Galaxy S9 SM-G960F Security Patch Level 2020-08-01 (1 August 2020). This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy S9 SM-G960F Binary 11 Firmware – G960FXXSBETH1
There are various reasons to flash “Stock Firmware on Galaxy S9 SM-G960F U11“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
Galaxy S9 SM-G960F U11 Firmware
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy S9 SM-G960F U11
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin Latest version
Galaxy S9 SM-G960F U11 Stock ROM Details:
Model | SM-G960F Binary11 U11, S11, Bit 11 |
Region / Country | India |
Language | Multi-Language |
Android version | Android 10 Q |
Operator | Clean INS (without logo, operator apps) |
PDA | G960FXXSBETH1 |
CSC | G960FOXMBETG8 |
Product code | INS |
Build Date | Mon, 10 Aug 2020 |
Security Patch Level | 2020-08-01 (1 August 2020) |
Size | 4.6 GB |
Download | Google Drive | Android File Host |
How To Install Galaxy S9 SM-G960F U11 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy S9 SM-G960F U11 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
The once Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy S9 SM-G960F finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S9 SM-G960F U11 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from using information in this guide.
- Phone must have a 70–80% charge.