The Galaxy J7 Prime SM-G610M Binary 2 Firmware Download Package has a Stock ROM of Galaxy J7 Prime SM-G610M U2 Security Patch Level 2018-08-01 (1 August 2018). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy J7 Prime SM-G610M U2 Android 7.0 – G610MUBS2BRH2
There are various reasons to flash “Stock Firmware on Galaxy J7 Prime SM-G610M U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy J7 Prime SM-G610M U2
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy J7 Prime SM-G610M U2 Stock ROM Details:
SM-G610M U2 Android 7.0 – G610MUBS2BRH2:
| Model | SM-G610M Binary 2 U2, S2, Bit 2 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android version | Android 7.0 Nougat |
| Operator | Clean ZTO (without logo, operator apps) |
| PDA | G610MUBS2BRH2 |
| CSC | G610MZTO2BRH1 |
| Product code | ZTO |
| Build Date | 08 Aug 2018 |
| Security Patch Level | 2018-08-01 (1 August 2018) |
| Size | 2 GB |
| Download | Google Drive | Android File Host |
How To Install Galaxy J7 Prime SM-G610M U2 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.
2: Download and extract the Galaxy J7 Prime SM-G610M U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds on your phone to complete the process.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy J7 Prime SM-G610M finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy J7 Prime SM-G610M U2 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.