The specific A01 Core SM-A013M Binary 1 Firmware Download Package has a Stock ROM of A01 Core SM-A013M U1 Security Patch Level 2020-07-01 (1 July 2020). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A01 Core SM-A013M U1 Android 10 Q Chile CHO – A013MUBU1ATG3
There are various reasons to flash “Stock Firmware on Galaxy A01 Core SM-A013M U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A01 Core SM-A013M U1
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A01 Core SM-A013M U1 Stock ROM Details:
SM-A013M U1 Chile CHO – A013MUBU1ATG3:
Model | SM-A013M Binary 1 U1, S1, Bit 1 |
Region / Country | Chile |
Language | Multi-Language |
Android version | Android 10 Q |
Operator | Clean CHO (without logo, operator apps) |
PDA | A013MUBU1ATG3 |
CSC | A013MOWO1ATG1 |
Product code | CHO |
Build Date | 2020-06-30 |
Security Patch Level | 2020-07-01 (1 July 2020) |
Size | 1.3 GB |
1 July 2020 Security Patch | Google Drive | Android File Host |
Samsung Galaxy A01 SM-A013 Full Repair Firmware 4 Files
A013GXXU 1 ATG7_A013GOJM1ATG7_XSG_10.0.zip | AFH | OneDrive | GDrive2 |
How To Install Galaxy A01 Core SM-A013M U1 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy A01 Core SM-A013M U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A01 Core SM-A013M finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A01 Core SM-A013M U1 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.