SAMSUNG GALAXY ACE 4 Official Firmware Flash Files

SAMSUNG GALAXY ACE 4 Official Firmware Flash Files

Readme Once: Take a Backup: If you are going to flash the above Firmware on your Samsung Galaxy Ace 4 device, then take a backup of important data such as Contacts, Call logsSMS, and other data as because your personal data will be deleted after flashing the stock firmware.

1- Backup your Call Log – Contacts – Sms – Etc With G Backup

The firmware shared on this page is officially released by the company and helps you to recovery your Phone if you ever got bootloop, software error, update error, hanging,Unknown Baseband, IMEI Null and dead issue.

Instructions Flashing SAMSUNG GALAXY ACE 4 With Odin :-

Download   USB Driver.    Odin3 v3.12.7.zip     And

G357FZXXU1ANHD France (XEF) – Android 4.4.4 KitKat

G357FZXXU1ANK4 Italy (ITV) – Android 4.4.4 KitKat

G357FZXXU1ANHD France (SFR) – Android 4.4.4 KitKat.

G357FZXXU1ANI2 France (Orange) – Android 4.4.4 KitKat

G357FZXXU1ANHD France (BOG) – Android 4.4.4 KitKat

G357FZXXU1ANHD France (NRJ) – Android 4.4.4 KitKat


Step 1: Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer then Skip this Step.

Step 2: Download and extract the stock ROM files on your computer. After extracting you will be able to see the following files.

Step 3: Now, Switch off your Smartphone.

Step 4: After switching-off the phone, you need to boot into Download Mode. To boot into download mode Press and hold Volume DownHome and Power button at same time for 5-8 seconds until download mode is active.

Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation you have to press the Volume Up key to continue.

Step 6: Now, Open Odin 3 (found in the extracted files, that you have downloaded in the Step#2) on your computer. Then connect your Smartphone to the computer.

Step 7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel.

Step 8: Once your device is detected by Odin, click on the PDA button and select the CF-Auto-Root.tar file (you have downloaded this file in step#2).

Step 9: Now, click on the Start button in Odin to begin the Flashing.

Step 10: Flashing usually takes 30-50 seconds to complete the rooting process on your Phone. Once Rooting process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process Smartphone will re-boot automatically.

Step 11: Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

    GALAXY ACE 4 SM-G357FZ Upgrade, GALAXY ACE 4 SM-G357FZ Boot loop Problem, GALAXY ACE 4 SM-G357FZ Official Firmware, GALAXY ACE 4 SM-G357FZ Stock Rom, GALAXY ACE 4 SM-G357FZ Unknown Baseband

Author: Gadgetmodder

Copyright © 2018 Aio Mobile Stuff
top
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close