At some point, while using Spice Xlife 451Q, you’ll probably encounter a situation in which you need to flash Spice Xlife 451Q firmware. You might need a Spice Xlife 451Q Stock ROM how do you make sure the flashing process goes off without a hitch?  

That’s what we’re going to tell you in this post! To do it, we’ll use a free flashing tool called Sp Flash Tool. This tool will enable you to flash the stock ROM of your Spice Xlife 451Q and set it up on a new Firmware.

The Spice Xlife 451Q mobile features a 4.5″ (11.43 cm) display with a screen resolution of 480 x 854 pixels and runs on the Android v5.1 (Lollipop) operating system. The device is powered by a Quad-core, a 1.3 GHz processor paired with 512 MB of RAM. As far as the battery is concerned it has 1750 mAh.

Over that, as far as the rear camera is concerned this mobile has a 5 MP camera. Other sensors include Accelerometer. So, does it have a fingerprint sensor? No, it doesn’t. Onboard, storage is at 8 GB with the option to expand the memory by Yes Up to 32 GB.

Remember this guide is also very much needed in case of upgrading or downgrading the Spice Xlife 451Q Firmware on Spice Xlife 451Q. First of all, download the software, Smartphone Flash Tool on your PC, and then flash your phone back to Stock ROM.

Now here we come with a full working guide on how to install Stock ROM and on Spice Xlife 451Q. In some cases, We have bricked our Spice Xlife 451Q, after that, we can bring back the phone (Unbrick) with the Stock Firmware anytime. Also if you think your Spice Xlife 451Q lag or has a problem, then flash the Stock ROM through the list below and save from the situation. Stock Firmware does not void a warranty on the Spice Xlife 451Q.

Spice Xlife 451Q Firmware Oreo ROM [Flash File]:

We will use the SPD Download Tool to unbrick the Spreadtrum Devices With Stock ROM Flash Files as we use for Spice Xlife M5 Pro. This tool is really very efficient. Just follow the step-by-step procedure to use One-Click Unbrick Tool and unbrick your SPD Phone.

SPD Download Tool and is used to Manually Upgrade or flash Spreadtrum Android Smartphone or Tablet. SPD Download Tool is used to flash only Stock Rom or Custom OR Stock Firmware on Spreadtrum Devices. Flash File comes in .zip Format. To use the Spd Factory Update tool Flash Stock ROM first needs to properly install the latest Spreadtrum Drivers.

The Benefit Of Spice Xlife 451Q Firmware:

• Flash Stock To Unbrick your Spice Xlife 451Q
• Fix boot loop issue
• Update and Downgrade Spice Xlife 451Q
• Unroot or Fix Bugs
• To solve the lag or stutter on Spice Xlife 451Q
• Fix software issues.
• Return to stock for warranty coverage.

Spice Xlife 451Q Firmware Details:

• Gapps File: Included
• Device Supported: Spice Xlife 451Q
• Tool Supported: SPD Flash Tool
• Processor: SPD SC9832E
• Os: Android 5.1 Lollipop

Download

Spice_Xlife_451Q_IND_v1.9_20151122

Pre-requirements to Install Spice Xlife 451Q Firmware:

• Supported Phone: Spice Xlife 451Q
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Phone Backup:

• Backup your Call Log – Contacts – Sms – Etc With G Backup

Spice Xlife 451Q Flashing Tool And Drivers:

• Download  SPD Download Tool.zip  –  Spreadtrum Drivers.zip

Disclaimer:

• Please read and understand the Full Guide Before Flashing Spice Xlife 451Q Stock ROM.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Make sure that the USB drivers for your device are installed on the computer.
• Your smartphone must have a 70–80% charge.
• Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Bin Packet load Error When Flashing Spice Xlife 451Q Firmware: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Spice Xlife 451Q Firmware: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Instructions to Install Spice Xlife 451Q Firmware:

Step 1. Install Spreadtrum Drivers.

Step 2. Install the SPD Download Tool.

Step 3. Open the Research download tool > bin folder.

Step 4. Launch ResearchDownload.exe.

Step 5. Click on the Load Packet icon (top left corner).

Step 6. In the window that pops up, navigate to the location of the Spice Xlife 451Q Firmware.PAC file, select it then click Open.

Step 7. The PAC file should now be loaded (its name should appear at the top).

Step 8. Click the Settings Icon (top left corner).

Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.

Step 8. Click the Start downloading button.

Step 9. You should see Waiting…. under the Progress bar.

Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to the PC on some phones) and flashing should begin. DO NOT interrupt.

Step 11. Once flashing is complete, you’ll see Passed.

Step 12. Click on the Stop downloading icon then disconnect the phone from the PC and boot.