Follow Detailed Instruction Senseit A109 Firmware Flashing With Sp Flash Tool.
Senseit A109 Firmware Flash File [Stock Rom]
First of all download Official Stock Senseit A109 Firmware. If you have Senseit A109 Smartphone. And You want to download the Stock ROM – Flash File For it. Then You are on the Correct Place, You have to do this by following the Below Guide.
This article contains the Senseit A109 Firmware Flash File. That will allow you to recover your Senseit A109 mobile into its initial Factory state.
Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.
Senseit A109 Firmware Flash File [Stock Rom]
We will use Sp Flash Tool to unbrick the Senseit A109. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Senseit A109.
The Advantages Senseit A109 Firmware:
- Flash Stock To Unbrick your Senseit A109
- Fix boot loop issue
- Update and Downgrade Senseit A109
- Unroot or Fix Bugs
- To solve the lag or stutter on Senseit A109
- Fix software issues.
- Return to stock for warranty coverage.
Senseit A109 Firmware Details:
- Gapps File: Included
- Device Supported: Senseit A109
- Tool Supported: SP Flash Tool
- Processor: MediaTek MT6582 – MT6735m
- Os: Android 6.0 Marshmallow
Download
Pre-requirements to Install Senseit A109 Firmware:
- Supported Phone: Senseit A109
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
Take Phone Backup:
Download Senseit A109 Flashing Tool And Drivers:
- Senseit A109 Flash Tool: Download the latest SP Flash tool and extract it (Install)
- Senseit A109 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
- Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)
Disclaimer:
- Please read and understand the Full Guide Before Flashing Senseit A109 Stock ROM.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Instructions to Install Senseit A109 Firmware:
- Extract And Run SP flash tool.
- Install MTK android USB drivers.
- Then download Senseit A109 Firmware.
- Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
- Now open SP flash tool.exe.
- When the SP flash tool opens, go to the download button in the SP flash tool.
- In the download tab, click on the scatter load button.
- After locating the scatter tab, click on the download button.
- Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
- When flashing is completed, a green ring will appear in the SP flash tool.
- Close the SP flash tool on your computer and unplug the phone.
- Power on the phone and enjoy it.
- After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
