Poptel P10 Firmware Flash File [RS802T RS802D]

by

Poptel P10 Firmware Flash File RS802T RS802D

 

If you’re looking for the Poptel P10 firmware you need to flash, it can sometimes be difficult to locate online. For Poptel P10. In this Article/Tutorial about Unbrick Poptel P10. and download flash files tested and working file. I have explained the method which is used by People or the Repairing Shops.

I hope This Tutorial Will Help You To Unbrick Poptel P10 Mediatek Based Devices.

 

Poptel P10 Firmware Flash File [RS802T RS802D]:

Remember this guide is also very much needed in case of upgrade or downgrade the Poptel P10 Firmware on Poptel P10. First of all, download the software, Smartphone Flash Tool on your PC and then flash your phone back to Stock ROM.

Now here we come with a full working guide on how to install Stock ROM and on Poptel P10. Some cases, We have bricked our Poptel P10, after that, we can bring back the phone (Unbrick) with the Stock Firmware anytime. Also if you think your Poptel P10 lag or has a problem, then flash the Stock ROM through the list below and save from the situation. Stock Firmware does not void a warranty on the Poptel P10.

[quads id=2]

The Advantages Poptel P10 Firmware:

  • Flash Stock To Unbrick your Poptel P10
  • Fix boot loop issue
  • Update and Downgrade Poptel P10
  • Unroot or Fix Bugs
  • To solve the lag or stutter on Poptel P10
  • Fix software issues.
  • Return to stock for warranty coverage.

Poptel P10 Firmware Details:

  • Gapps File: Included
  • Device Supported: Poptel P10
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6763
  • Os: Android

Download

[quads id=2]

Pre-requirements to Install Poptel P10 Firmware:

  • Supported Phone: Poptel P10
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Phone Backup:

Poptel P10 Flashing Tool And Drivers:

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Poptel P10 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Poptel P10 Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Poptel P10 Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

 

Follow Detailed Instruction Poptel P10 Firmware Flashing With Sp Flash Tool.