Oale X3 Firmware

if you are facing Oale X3 firmware issue. Then you can install ROM at home without any help of a software technician. in fact not all of the issues that are the hardware fault.

Today we will discuss how to sort out Oale X3 Stock Rom issue. There are several methods to Flash Oale X3 Firmware. Of course, there are also some custom mods and ROMs that you can try.

However, if you do not like the custom ROMs you have installed and want to go back to the original operating system, we have the guide for you.

If you are looking for this guide, we will now see how you can flash the stock firmware on Oale X3.

We are going to Flash Stock ROM on Oale X3. In this guide, we have used the SP Flash Tool to flash the Oale X3 Firmware.

And we include the Official link to Download Oale X3 Flash File and all Needed Files. your device may get bricked And flashing stock ROM is the only way to go out.

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a Comment.

We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Oale X3. I believe this tool is very efficient.

Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Oale X3.

Advertisment

The Advantages Of Oale X3 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Oale X3 is stuck in a boot loop, and as the name implies, is caused by a software error on Oale X3.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the stock ROM on Oale X3 through recovery or with SP Flash Tool.

If your Oale X3 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Oale X3 Stock ROM Details:

Gapps File: Included
Device Supported: Oale X3
Tool Supported: SP Flash Tool
Processor: MediaTek MT6580
Os: Android 6.0 Marshmallow
Download Oale X3 Flash File Oale X3 MT6580 6.0 Flash File.zip

Oale x3 Firmware.rar 

Oale_X3_MT6580_20171213_6.0.zip

Oale_X3_MT6580_20180712_6.0.zip

MT6580__OALE__X3__magc6580_we_c_m__6.0__alps-mp-m0.mp1- V2.39_magc6580.we.c.m_P21 

Advertisment

Pre-requirements to Install Oale X3 Stock Firmware:

  • Supported Phone: Oale X3
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Oale X3 Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware


2. Download Oale X3 Flashing Tool And Drivers:

A.  Download and install Oale X3 Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Oale X3.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Oale X3.


Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Oale X3 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Oale X3 must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Oale X3 Firmware:

1. Download Oale X3 Firmware zip file given above and extract it in your computer.

2. Download Oale X3 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Oale X3 smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Oale X3 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed Oale X3 stock ROM on your  Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow detailed Instruction to flash Oale X3 Firmware with Sp flash tool.

LEAVE A REPLY

Please enter your comment!
Please enter your name here