Intex Infie 33 Firmware Flash File Stock ROM

Official Intex Infie 33 Firmware for Intex Infie 33, in the article you Will Learn How to Install Stock ROM – Flash File on Intex Infie 33. if you own an Intex Infie 33 smartphone.

And want to Install Stock Firmware– Flash File on it. To unbrick or fix the boot loop issue then you are in the Correct Place. The article, we Share a Step by Step Guide to Install Stock Firmware on Intex Infie 33.


The Intex Infie 33 is powered by a 1.3GHz quad-core processor and it comes with 1GB of RAM. The phone packs 8GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Intex Infie 33 packs a 5-megapixel primary camera on the rear and a 5-megapixel front shooter for selfies.

The Intex Infie 33 runs Android 7.0 and is powered by a 3000mAh. It measures 145.80 x 69.60 x 9.03 (height x width x thickness) and weighs 148.00 grams.

The Intex Infie 33 is a Dual-SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, FM, 3G, and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include Face unlock.

Intex Infie 33 Firmware Flash File [Stock ROM]:

Remember this guide is also very much needed in case of upgrade or downgrade the Intex Infie 33 Firmware on Intex Infie 33. First of all, download the software, Smartphone Flash Tool on your PC, and then flash your phone back to Stock ROM.

Now here we come with a full working guide on how to install Stock ROM and on Intex Infie 33. In some cases, We have bricked our Intex Infie 33, after that, we can bring back the phone (Unbrick) with the Stock Firmware anytime.

Also if you think your Intex Infie 33 lag or has a problem, then flash the Stock ROM through the list below and save from the situation. Stock Firmware does not void a warranty on the Intex Infie 33.

We will use the SPD Download Tool to unbrick the Spreadtrum Devices With Stock ROM Flash Files as we use for Tecno Camon iSky 2 IN1 Pro. This tool is really very efficient. Just follow the step-by-step procedure to use the One Click Unbrick Tool and unbrick your SPD Phone.

SPD Download Tool and is used to Manually Upgrade or flash Spreadtrum Android Smartphone or Tablet. SPD Download Tool is used to flash only Stock Rom or Custom OR Stock Firmware on Spreadtrum Devices. Flash File comes in .zip Format. To use the Spd Factory Update tool Flash Stock ROM first needs to properly install the latest Spreadtrum Drivers.

The Benefit Of Stock Firmware:

  • Flash Stock To Unbrick your Intex Infie 33
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Intex Infie 33
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Intex Infie 33
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Intex Infie 33 Firmware Details:

  • Gapps File: Included
  • Device Supported: Intex Infie 33
  • Tool Supported: SPD Flash Tool
  • Processor: SPD
  • Os: Android 7.0 Nougat
[quads id=2]
Download Intex_Infie_33_180709

Pre-requirements to Install Intex Infie 33 Firmware:

  • Supported Phone: Intex Infie 33
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Intex Infie 33 Flashing Tool And Drivers:


  • Please read and understand the Full Guide Before Flashing Intex Infie 33 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Bin Packet load Error When Flashing Intex Infie 33 Firmware: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Intex Infie 33 Firmware: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Instructions to Install Intex Infie 33 Firmware:

Step 1. Install Spreadtrum Drivers.

Step 2. Install the SPD Download Tool.

Step 3. Open the Research download tool > bin folder.

Step 4. Launch ResearchDownload.exe.

Step 5. Click on the Load Packet icon (top left corner).

Step 6. In the window that pops up, navigate to the location of the Intex Infie 33 Firmware. file, select it then click Open.

Step 7. The PAC file should now be loaded (its name should appear at the top).

Step 8. Click the Settings Icon (top left corner).

Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.

Step 8. Click the Start downloading button.

Step 9. You should see Waiting…. under the Progress bar.

Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to the PC on some phones) and flashing should begin. DO NOT interrupt.

Step 11. Once flashing is complete, you’ll see Passed.

Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.

Intex Infie 33 Firmware Flash File [Stock ROM]

Follow Detailed Instruction Intex Infie 33 Firmware Flashing With Spd Flash Tool.