You have a Vizio smart TV, and a movie, TV show, or event you enjoy is currently being broadcast. You switch on the TV right away so you don’t miss any of the action. Your Vizio Smart TV won’t power on, though, for some weird reason. This can be annoying, especially if you’re interested in the program. So, you’ve come to the right site if you’re looking for ways to diagnose a Vizio smart TV that won’t switch on.
It is best to first identify and diagnose the problem with your Vizio Smart TV before assuming that it has broken and making the decision to replace it with a newer Smart TV. Based on the results, you will know whether the TV is still in great working order or whether you need to get a new one.
Let’s get started.
Perform a Soft Power Reset
The Power Reset function is an excellent way to reliably get your TV to reset itself without causing any kind of data to be lost in the process. This helps it clean its RAM and also perhaps any issues that could be the cause of your Vizio Smart TV not turning on. If your Vizio Smart TV isn’t turning on, this could be the problem. The procedures that you need to take in order to perform a power reset on your Vizio Smart TV are listed below.
- Take off the plug that supplies electricity to your Vizio Smart TV.
- Press and hold the power button on your Vizio smart TV while the cord is being removed from the outlet.
- Maintain pressure on the button for ten to fifteen seconds.
- After 15 seconds have elapsed, you can stop holding down the button; however, you still have another 40 seconds of waiting before you can put the power wire back into the socket.
- Now, turn on the television set. It is expected that when you turn on your Vizio Smart TV, it will turn on, show the Vizio logo, and function normally.
However, if this method of troubleshooting did not help you in any way, you can move on to the next method of fixing the problem.
Perform a TV Remote Power Cycle
If cycling the power supply on your Vizio Smart TV did not resolve the issue, the problem may lie in your television’s remote control. Let’s have a look at the procedures you need to follow in order to power cycle the remote for your Vizio Smart TV.
- Get the Vizio remote, and then remove the cover of the battery compartment on the back of the remote.
- Check the condition of the batteries and make sure that they are not broken in any way.
If they are broken, you may easily acquire newer batteries to replace the damaged ones. - Simply take the batteries out of your remote control if they are in good condition.
- Find the button that says “power” on your Vizio TV robot and keep pressing it as you sleep. It is necessary to hold down the button for around a quarter of a minute.
- Now, place the batteries back into the Vizio Smart TV and turn the power back on. Your television should now respond to the remote control and immediately power on.
If the television still does not appear to turn on when you attempt to use it, you will need to proceed with the additional troubleshooting methods.
Examine the Cables and Cords to See If They Are Damaged
There are two possible outcomes that could occur with the lone cable that provides electricity to your Vizio Smart TV. There could be some cuts in the cable, or the cable could be damaged, either of which would result in the television not receiving any power.
Check out the plug, while you’re at it. Examine the area carefully to see whether there is any damage that can be seen. Damage to the television’s internal plug can also result in the television not getting any power, but it can also result in electric shocks due to the damaged plug.
Consider having either or both of the goods fixed or replaced if they have sustained any kind of damage. After you get the plugs and wires repaired, you can easily test whether or not the Vizio smart TV still functions by turning it on and seeing if it does so.
Change the Power Source or Outlet
Consider having them fixed or replaced if one or both pieces are damaged. After replacing the plugs and connections, you can simply turn on the Vizio smart TV to test it out.
Check Connected Input Devices
Given the wide range of extra input devices that are compatible with your TV, it is preferable to focus on those that are linked to it via the HDMI input connector. Before they can be utilized with your TV, devices like streaming sticks, media players, and even gaming consoles need to be turned on. You won’t see any form of input on your TV screen if these devices are plugged in but not turned on or linked to a power source. Additionally, making sure the TV is connected to the proper input source is important.
Bad HDMI Cables and Ports
Make sure your HDMI cable is in good condition and has no cuts or sharp bends if you want to be able to connect a device to your TV. If there are such obvious damages, try switching out the cable for a newer one before turning on your TV. The Vizio Smart TV should turn on and run well.
Examine the HDMI ports that are located on the back of your Vizio Smart TV as well. You must have those ports checked if they are loose or show obvious signs of damage. You will need to have the customer support staff examine your Vizio Smart TV for this.
Possible Internal Damage, Weak Power Supply, or Dead Display Panel
Now, if none of the aforementioned troubleshooting techniques has been able to get your Vizio Smart TV to turn on, there is only one possible explanation. Your Vizio Smart TV may not be showing anything as a result of one or more of the aforementioned internal parts malfunctioning. The only option in this situation is to get your Vizio Smart TV tested by brand-authorized experts.
You can get the TV fixed if the repair prices are not too high. However, it is advisable to purchase a newer smart TV from any other brand if the TV’s repair prices are outrageous.
Claim your Warranty on your Vizio Smart TV
The best course of action is to simply have the entire TV unit replaced if your Vizio Smart TV is still covered by warranty or if you have an extended warranty added to it. Those who own more recent Vizio TV models will have no problems with this. Your best bet is to purchase a new TV from any other manufacturer if you have an older Vizio smart TV model that simply won’t turn on.
Numerous people have complained about the Vizio Smart TV only displaying its logo before turning it off on its own. Therefore, it is advised to check into alternative TV brands that do not have this kind of trouble if you’re in the market for a new TV or intend to replace your morning Vizio TV.
The Reasons Why Your Vizio Tv Doesn’t Power Up
The Vizio Smart TV may not turn on for a variety of reasons.
- Damage to the TV’s power supply unit may have resulted from problems with the electrical supply.
- Any display damage could result in the internal display components breaking and ceasing to work.
- The TV lost power while undergoing a firmware update, rendering it utterly inoperable.
Conclusion
This brings to a close the article that will walk you through all you need to know about how you can fix the problem with your Vizio Smart TV not turning on. In addition to the troubleshooting procedures, it is essential to have a solid understanding of the potential factors that contributed to the malfunction of your Vizio Smart TV.
We hope this guide has helped you solve the issue or has helped you make the sensible choice of going to pick out a smart TV from a brand that is able to rectify issues, have solutions, and above all ensure that such issues do not happen on a large scale.
Feel free to share any additional troubleshooting options that have worked for you in the comments section below if you have any that you’ve tried and found successful.