Galaxy Xcover Pro SM-G715U1 U5 Firmware – G715U1UES5ATK3
The Galaxy Xcover Pro SM-G715U1 U5 Firmware Download Package has a Stock ROM of Galaxy Xcover Pro SM-G715U1 U5 Security Patch Level 01-11-2020 (November 1, 2020). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy Xcover Pro SM-G715U1 Binary 5 Android 10 Q Brazil ZTO – G715U1UES5ATK3
There are various reasons to flash “Stock Firmware on Galaxy Xcover Pro SM-G715U1 U5“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Prerequisites:
- Supported Phone: Galaxy Xcover Pro SM-G715U1 U5
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy Xcover Pro SM-G715U1 U5 Stock ROM Details:
SM-G715U1 U5 Brazil ZTO – G715U1UES5ATK3:
Model | SM-G715U1 Binary 5 U5, S5, Bit 5 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 10 |
Operator / Carrier | Clean ZTO (without logo, operator apps) |
PDA | G715U1UES5ATK3 |
CSC | G715U1OWO5ATK6 |
Product code | ZTO |
Build Date | 2020-11-20 |
Security Patch Level | 01-11-2020 (November 1, 2020) |
Size | 3.6 GB |
Download | Google Drive | Android File Host |
How To Install Galaxy Xcover Pro SM-G715U1 U5 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy Xcover Pro SM-G715U1 U5 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
You should run your desired firmware when your Galaxy Xcover Pro SM-G715U1 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy Xcover Pro SM-G715U1 U5 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.