The specific Galaxy S6 SM-G920R4 U4 Firmware Download Package comes with a Stock ROM of Galaxy S6 SM-G920R4 U4 Security Patch Level 2018-08-01 (1 August 2018). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Galaxy S6 SM-G920R4 Binary 4 Android 7.0 Nougat United States USC – G920R4TYU4DRI1
There are various reasons to flash “Stock Firmware on Galaxy S6 SM-G920R4 U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
How To Install Galaxy S6 SM-G920R4 U4 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy S6 SM-G920R4 U4 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy S6 SM-G920R4 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy S6 SM-G920R4 U4 Firmware“.
Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.