Galaxy J5 Pro SM-J530Y Firmware – Full Repair
The specific Galaxy J5 Pro SM-J530Y Firmware Download Package has a Stock ROM of Galaxy J5 Pro SM-J530Y. This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy J5 Pro SM-J530Y Firmware
There are various reasons to flash “Stock Firmware on Galaxy J5 Pro SM-J530Y“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy J5 Pro SM-J530Y
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy J5 Pro SM-J530Y Stock ROM Details:
ROM FULL J530YM DOWNLOAD |
||||||
AP VERSION | CSC VERSION | code | Type | OS | Size | google link |
J530YMDXU 5 CSH8 | J530YMOLD5CSH8 | THL | FULL | 9 | 2.2G | DOWNLOAD |
J530YMDXS 5 BSG1 | J530YMOLD5BSG1 | THL | FULL | 8.1 | 2.1G | DOWNLOAD |
J530YMDXU 4 BSD1 | J530YMOLD4BSD1 | THL | FULL | 8.1 | 2.1G | DOWNLOAD |
J530YMDXS 4 BRL1 | J530YMOLD4BRJ1 | THL | FULL | 8.1 | 2.1G | DOWNLOAD |
J530YMDXU 3 BRH6 | J530YMOLD3BRH3 | THL | FULL | 8.1 | 2.0G | DOWNLOAD |
J530YMDXU 3 ARG2 | J530YMOLD3ARG2 | THL | FULL | 7.0 | 1.7G | DOWNLOAD |
J530YMDXU 2 AQI4 | J530YMOLD2AQI4 | THL | FULL | 7.0 | 1.7G | DOWNLOAD |
J530YMDXU 1 AQF1 | J530YMOLD1AQG1 | THL | FULL | 7.0 | 1.4G | DOWNLOAD |
How To Install Galaxy J5 Pro SM-J530Y Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.
2: Download and extract the Galaxy J5 Pro SM-J530Y Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you can see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your Device from the computer.
When your Galaxy J5 Pro SM-J530Y finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy J5 Pro SM-J530Y Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.