Galaxy A30 SM-A305GT U8 Firmware – Android 11 R
The specific Galaxy A30 SM-A305GT U8 Firmware Download Package has a Stock ROM of Galaxy A30 SM-A305GT U8 Security Patch Level 2022-10-01 (October 1, 2022). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A30 SM-A305GT Binary 8 Android 11 R Peru PEO A305GTVJU8CVK1
There are various reasons to flash “Stock Firmware on Galaxy A30 SM-A305GT”. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Prerequisites:
- Supported Phone: Galaxy A30 SM-A305GT U8
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A30 SM-A305GT U8 Stock ROM Details:
SM-A305GT U8 Peru PEO A305GTVJU8CVK1:
Model | SM-A305GT Binary 8 U8, S8, Bit 8 |
Region / Country | Peru |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Operator / Carrier | Clean PEO (no logo, carrier apps) |
AP / PDA | A305GTVJU8CVK1 |
CSC | A305GTOWO8CVK1 |
Modem CP Version / Baseband | A305GTVJU8CVK1 |
product code | PEO |
Build Date | 2022-11-23 |
Security Patch Level | 2022-10-01 (October 1, 2022) |
Size | 3.8GB |
Download | Mega | Google Drive |
Other Firmware For SM-A305GT:
- Galaxy A30 SM-A305GT U5 Firmware File [Stock ROM]
- Galaxy A30 SM-A305GT U6 Firmware – A305GTVJS6BTG1
- Galaxy A30 SM-A305GT U7 Firmware – A305GTVJS7BTK2
How To Install Galaxy A30 SM-A305GT U8 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy A30 SM-A305GT U8 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
You should run your desired firmware when your Galaxy A30 SM-A305GT U8 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A30 SM-A305GT U8 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.