Galaxy A01 SM-A015U U8 Firmware – Android 12 S

SM-A015U U8 Firmware
If you own a Galaxy A01 SM-A015U U8 smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A01 SM-A015U U8 With 2023-07-01 (July 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy A01 SM-A015U Binary 8 Android 12 United States USA CHA Xfinity Mobile A015UVHU8CWG3

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy A01 SM-A015U U8”. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

  • Fix boot loop issue.
  • Update and Downgrade.
  • Unroot or Fix Bugs on the phone.
  • To solve the lag or stutter.
  • Fix software issues.
  • Return to stock for warranty coverage.

Preparation:

  1. Supported Phone: Galaxy A01 SM-A015U U8.
  2. Charge your mobile: You may no less than a half charge.
  3. Laptop or PC: To execute this installation, you must use a PC or Laptop.
  4. Backup Android Phone
  5. Download and install Samsung USB Driver
  6. Download Odin’s Latest version

How To Install Galaxy A01 SM-A015U U8 Stock Firmware:

Download Galaxy A01 SM-A015U U8 Latest Firmware:

SM-A015U U8 United States USA CHA Xfinity Mobile A015UVHU8CWG3:

Model SM-A015U Binary 8 U8, S8, Bit 8
Region / Country United States
Language Multi-Language
Android Version Android 12 S
Operator / Carrier Xfinity Mobile CHA
AP / PDA A015UVHU8CWG3
CSC A015UCHA8CWG3
Modem CP Version / Baseband A015UVHU8CWG3
Product code TEA
Build / Release Date 2023-07-14
Security Patch Level 2023-07-01 (July 1, 2023)
Size 3.2 GB
[quads id=2]
Download Qiwi  Google Drive

Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy A01 SM-A015U U8 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy A01 SM-A015U U8 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Troubleshooting

If you encounter any problems during the firmware update process, here are a few things you can try:

  • Restart your device and retry the installation process.
  • Ensure your device has sufficient battery.
  • If you continue to encounter problems, you may need to perform a factory reset on your device.

Conclusion

Installing the latest firmware on your Galaxy A01 SM-A015U U8 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.

Leave a Comment