How To Flash Aplus A7000 Pro Firmware File

This time I will share a tutorial on how to flash Aplus A7000 Pro firmware file. With computers in an easy and tested way on our devices. In this article, you will find Aplus A7000 Pro Stock Firmware ROM.

Official download link flashing tutorial and flash tool. Download Aplus A7000 Pro stock ROM from here. Flash it in your device and enjoy the native Android experience again.

All the solution to your problems with your phone is currently available in this article. You just need some material like Aplus A7000 Pro Stock ROM, USB drivers and flash tool that is in it.

How To Flash Aplus A7000 Pro Firmware File [ROM]

For the ease of my readers, I have divided this method into different parts.

1. In the first section, we will talk about the Aplus A7000 Pro Firmware (flash file) benefits and link it to download.

2. The other part is the necessary tools and pre-requirements to install the Aplus A7000 Pro Firmware.

3. And in the last part, we will guide you How to flash this Aplus A7000 Pro ROM file,

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.

The Advantages Of Aplus A7000 Pro Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re phone is stuck in a boot loop, and as the name implies, is caused by a software error on Android.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the Aplus A7000 Pro stock ROM on Aplus A7000 Pro through recovery or with SP Flash Tool.

If your Aplus A7000 Pro device turns to a soft-brick, it may:

• Keeps Rebooting;
• Boots Straight Into Recovery;
• Boots Straight Into its Bootloader;
• Freeze at the startup screen or boot Animation;

Aplus A7000 Pro Stock ROM Details:

Download Aplus A7000 Pro Flash File:

Gapps File:	Included
Device Supported:	Aplus A7000 Pro
Tool Supported:	SP Flash Tool
Processor:	MediaTek MT6580
Os:	Android 5.1 Lollipop
Download:	Aplus A7000 Pro MT6580 5.1.zip

Pre-requirements to Flash Aplus A7000 Pro Stock Firmware File:

• Supported Phone: Aplus A7000 Pro
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

1. Take Aplus A7000 Pro Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware

---

2. Download Aplus A7000 Pro Flash Tool And Drivers:

A.  Download and install Aplus A7000 Pro Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Aplus A7000 Pro Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Aplus A7000 Pro.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Aplus A7000 Pro.

Disclaimer:

• Please read and understand the Full Guide Before Flashing Aplus A7000 Pro.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Before flashing, Stock ROM Aplus A7000 Pro must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Flash Aplus A7000 Pro Firmware File:

1. Download Aplus A7000 Pro flash file zip file given above and extract it in your computer.

2. Download Aplus A7000 Pro USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Aplus A7000 Pro smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Aplus A7000 Pro Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Aplus A7000 Pro Android device.

Follow Detailed Instruction Aplus A7000 Pro Firmware Flashing With Sp Flash Tool.