Galaxy S4 SGH-M919N Firmware

We are going to Flash firmware on Galaxy S4 SGH-M919N. In this guide, we have used the SP Flash Tool to Install the Stock Firmware on Galaxy S4 SGH-M919N. 

And we include the Official link to Download Galaxy S4 SGH-M919N Stock ROM and all Needed Files.  your device may get bricked And flashing stock ROM is the only way to go out. To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.

How To Flash Samsung Galaxy S4 SGH-M919N Stock ROM

There are various reasons to flash “Stock Firmware on Galaxy S4 SGH-M919N. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

- Advertisement -

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.
[quads id=2]

Pre-requirements to Install Galaxy S4 SGH-M919N Stock ROM

How To Backup Android Phone Before Flashing Stock Firmware

How To Install Galaxy S4 SGH-M919N Firmware Update

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy S4 SGH-M919N Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy S4 SGH-M919N finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S4 SGH-M919N Firmware.
  • Use these instructions at your own risk.
  • Phone must have a 70–80% charge.

Galaxy S4 SGH-M919N Stock ROM Details:

File Name: M919NUVUFOK3_M919NTMBFOK3_TMB.zip
Country: USA
File Size: 2 GB
Android Version: 4.4.4
[quads id=2]
Get Link

9 COMMENTS

Comments are closed.