Note 4 SM-N910C Firmware File

This post is about flashing Samsung Galaxy Note 4 SM-N910C Firmware with a flashing tool. A tool that most users do not know how to deal with this and Flash ROM file.

Android phones are being updated day by day. Their hardware is being strengthened. And their software is going to be friendly to the user With all of these changes, the new tools will also come to flash their firmware.

How To Flash Samsung Galaxy Note 4 SM-N910C Stock ROM

There are various reasons to flash “Stock Firmware on Galaxy Note 4 SM-N910C. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

- Advertisement -

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Pre-requirements to Install Galaxy Note 4 SM-N910C Stock ROM

Most smartphones back up automatically in the background in case of incidents. To ensure a complete transition to your new device, a full backup is necessary.

How To Install Galaxy Note 4 SM-N910C Firmware Update

1: Download and Install Samsung USB Driver on your computer.

2: Download and extract the Galaxy Note 4 SM-N910C Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold the Volume Down, Home and Power buttons at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy Note 4 SM-N910C finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. The firmware number can be found under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Note 4 SM-N910C Firmware.
  • Use these instructions at your own risk.
  • Phone must have a 70–80% charge.

Must Read: Samsung Firmware Flash Full Guide

Galaxy Note 4 SM-N910C Stock ROM Details:

File Name: N910CXXS2CPF1_N910CANC2CPF1_ANC.zip
Country: Argentina
File Size: 2 GB
Android Version: 5.1.1
[quads id=2]
Get Link
File Name: N910CXXS2DPJ3_N910CZTO2DPE2_ZTO.zip
Country: Brazil
File Size: 2 GB
Android Version: 6.0.1
Get Link

1 COMMENT

Comments are closed.