Home Vivo

Vivo X3V Firmware File [Stock ROM]

Vivo X3V
Welcome To all in one thread for Vivo X3V in this post I will share all kinds of Vivo X3V PD1227V Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Vivo X3V software upgrade.

How To Flash Vivo X3V Firmware Stock ROM

“Vivo X3V Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is X3V Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Stock Firmware:

  • Flash Stock ROM to unbrick your Vivo X3V
  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates
[quads id=2]

Pre-requirements to Install Vivo X3V Stock ROM:

  • Supported Phone: Vivo X3V
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Vivo X3V Full Backup

Before going to install Vivo X3V stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

2. Download Vivo X3V Flash Tool And Drivers:

A.  Download and install Vivo X3V Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the QFIL QPST Flash Tool for as Vivo X3V Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash Vivo X3V Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the Vivo_X3V_PD1227V_31032015_QFIL files in the Vivo X3V ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Vivo X3V Stock ROM using QFIL Flash tool.

Follow Detailed Instruction Vivo X3V Firmware Flashing With Qfil Flash Tool.


  • Please read and understand the Full Guide before flashing “Vivo X3V Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM on Vivo X3V must have a 70–80% charge.
[adinserter block=”4″]

Vivo X3V Firmware:


Gapps: Included No Root
Device Supported: Vivo X3V No Twrp And Nand Backup
Tool: QPST Tool – QFIL Qualcomm Flash Image Loader No Customization And Over cloaking
Soc: Qualcomm No ADB Ad Block
Os: Android 4.4.4 Pre-installed OEM apps

[quads id=2]

Get Link

Exit mobile version