Saturday , September 18 2021

Huawei Y7 Pro DUB-LX2 Firmware [Stock ROM]

Y7 Pro DUB LX2 Firmware - Huawei Y7 Pro DUB-LX2 Firmware [Stock ROM]

Welcome To all in one thread for Huawei Y7 Pro DUB-LX2 in this post I will share all kinds of Huawei Y7 Pro DUB-LX2 Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Huawei Y7 Pro DUB-LX2 software upgrade.

How To Flash Huawei Y7 Pro DUB-LX2 Stock ROM:

“Huawei Y7 Pro DUB-LX2 Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Huawei Y7 Pro DUB-LX2 Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Huawei Y7 Pro DUB-LX2 Stock Firmware:

  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Pre-requirements to Install Huawei Y7 Pro DUB-LX2 Stock ROM:

  • Supported Phone: Huawei Y7 Pro DUB-LX2
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Take Huawei Y7 Pro DUB-LX2 Full Backup

Before going to install Huawei Y7 Pro DUB-LX2 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download Huawei Y7 Pro DUB-LX2 Flash Tool And Drivers:
  • A.  Download and install Huawei Y7 Pro DUB-LX2 Drivers. The necessary communication between your device and PC.
  • These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
  • B. We use the QFIL QPST Flash Tool for as Huawei Y7 Pro DUB-LX2 Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash Huawei Y7 Pro DUB-LX2 Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY, and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the WW_ZS670KS_29.12.18.12_MR0.1_20200831_release-user.raw ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

  • Congratulations, You have successfully installed Stock ROM using the QFIL Flash tool.

Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.


  • Please read and understand the Full Guide before flashing “Huawei Y7 Pro DUB-LX2 Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Huawei Y7 Pro DUB-LX2 Firmware Details:


Gapps: Included No Root
Device Supported: Huawei Y7 Pro DUB-LX2 No Twrp And Nand Backup
Tool Supported: QFIL QPST Flash Tool No Customization And Over cloaking
Soc: Qualcomm No ADB Ad Block
Os: Android 7.0 Nougat Pre-installed OEM apps

Download Firmware/Flash File

Check Also

Honor V30 Pro OXF-AN10 Firmware

Huawei Honor V30 Pro OXF-AN10 Firmware [Stock ROM Download]

The specific Honor V30 Pro OXF-AN10 Stock Firmware Download Package comes with a Stock ROM of Honor …

Leave a Reply

Your email address will not be published. Required fields are marked *