Hisense I300T Firmware Flash File [Stock ROM Download]

Hisense

Welcome To all in one thread for Hisense I300T in this post I will share all kinds of Hisense I300T Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Hisense I300T software upgrade.

How To Flash Hisense I300T Stock ROM:

“Hisense I300T Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Hisense I300T Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per their desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Hisense I300T Stock Firmware:

  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Pre-requirements to Install Hisense I300T Stock ROM:

  • Supported Phone: Hisense I300T
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Take Hisense I300T Full Backup

Before going to install Hisense I300T stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download Hisense I300T Flash Tool And Drivers:
  • A.  Download and install Hisense I300T Drivers. The necessary communication between your device and PC.
  • These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
  • B. We use the QFIL QPST Flash Tool for as Hisense I300T Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash Hisense I300T Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY, and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the WW_ZS670KS_29.12.18.12_MR0.1_20200831_release-user.raw ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

  • Congratulations, You have successfully installed Stock ROM using the QFIL Flash tool.

Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide before flashing “Hisense I300T Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Hisense I300T Firmware Details:

Disadvantage

Gapps: IncludedNo Root
Device Supported: Hisense I300TNo Twrp And Nand Backup
Tool Supported: QPST Tool – QFILNo Customization And Over cloaking
Soc: QualcommNo ADB Ad Block
Os: Android 4.3Pre-installed OEM apps

[adinserter block=”1″]

DownloadHisense_I300T_20140813_4.3_QFIL

Check Also

Ulefone Armor X9 Firmware

Ulefone Armor X9 Firmware Flash File [Stock ROM Download]

If your Ulefone Armor X9 phone is corrupt or bricked. Download Ulefone Armor X9 stock …

Leave a Reply

Your email address will not be published. Required fields are marked *

Adblock Detected!

Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by whitelisting our website.