Oppo K1 Firmware File [Stock ROM]
Welcome To all in one thread for Oppo K1 in this post I will share all kinds of Oppo K1 Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Oppo K1 software upgrade.
How To Flash Oppo K1 Firmware Stock ROM
“Oppo K1 Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Oppo K1 Stock Rom.
The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.
The Benefit Of Stock Firmware:
- Flash Stock ROM to unbrick your Oppo K1
- Fix the boot loop problem
- Upgrade and Downgrade
- Unroot or Fix Bugs on your phone
- Fix the lag or stutter on
- Revert to stock to gain your warranty
- Will able to receive OTA Updates
Pre-requirements to Install Oppo K1 Stock ROM:
- Supported Phone: Oppo K1
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
1. Take Oppo K1 Full Backup
Before going to install Oppo K1 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.
Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
How To Backup Android Phone Before Flashing Stock Firmware
2. Download Oppo K1 Flash Tool And Drivers:
A. Download and install Oppo K1 Drivers. The necessary communication between your device and PC.
These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
B. We use the QFIL QPST Flash Tool for as Oppo K1 Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.
Instructions to Flash Oppo K1 Stock ROM:
1. Download and install the driver and tool above. Then launch the QFIL tool.
2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY and plug in the USB cable to connect to the computer.
3. On the QFIL tool, select the files, in turn, select the files in the Oppo K1 ROM folder.
4. After clicking Download, wait for the flash process to finish, the time is about 5-10.
5: During the flashing process, your device will restart automatically.
6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.
Congratulations, You have successfully installed Oppo K1 Stock ROM using QFIL Flash tool.
Follow Detailed Instruction Oppo K1 Firmware Flashing With Qfil Flash Tool.
Disclaimer:
- Read and understand the Full Guide before flashing.”Oppo K1 Firmware”.
- Use these instructions at your own risk.
- Before flashing, Stock ROM on Oppo K1 must have a 70–80% charge.
Oppo K1 Firmware: |
Disadvantage |
| Gapps: Included | No Root |
| Device Supported: Oppo K1 | No Twrp And Nand Backup |
| Tool: QPST Tool – QFIL Qualcomm Flash Image Loader | No Customization And Over cloaking |
| Soc: QCOM SD 660 | No ADB Ad Block |
| Os: Android 8.1 | Pre-installed OEM apps |
| Product version: |
PBCM30_11_OTA_0100_all_ambF3sGNyG5Z_local |
| Firmware RMX1831 OTA Download |
| Firmware PBCM30 OFP Download |
