Lyf Jio LF-2406S Firmware Flash File [Stock ROM Download]

 LF-2406S Firmware

Download Firmware/Flash File For Lyf Jio LF-2406S:

Welcome To all in one thread for Lyf Jio LF-2406S in this post I will share all kinds of Lyf Jio LF-2406S Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Lyf Jio LF-2406S software upgrade.

“Lyf Jio LF-2406S Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is  Lyf Jio LF-2406S Stock ROM 

The other type of the Rom is Custom Rom which advance users installed after flashing it as per their desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Stock Firmware:

  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Firmware Details:

File Name: Lyf_Jio_LF2406S_000-02-05-260220_QPST.zip

[the_ad id=’190809′]
DownloadMirror 1
Pre-requirements:
  • Supported Phone: Lyf Jio LF-2406S
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Take Lyf Jio LF-2406S Full Backup

Before going to install Lyf Jio LF-2406S stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download Lyf Jio LF-2406S Flash Tool And Drivers:
  • A.  Download and install Lyf Jio LF-2406S Drivers. The necessary communication between your device and PC.
  • These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
  • B. We use the QPST Flash Tool as Lyf Jio LF-2406S Flash Tool because this tool is very efficient and support all kind of Qualcomm phones.
Instructions to Flash Lyf Jio LF-2406S Stock ROM:

How To Flash Stock ROM On Lyf Jio LF-2406S With use QPST Flash Tool:

Download and install Qualcomm USB Driver on the Computer. If in case Qualcomm Drivers are already installed on the computer, then SKIP this step.

Download and install QPST Tool on your Computer. Once QPST Tool is installed on the computer, Go to C:\Program Files\Qualcomm\QPST\bin\ folder. There, you will be able to see the following files:

Download and install QPST Tool

Now, Connect your Qualcomm Device to the Computer using the USB Cable.

Now, Open QPST Config:

Once QPST Configuration is Launched, Click on the Port Menu.

Now, Click on the Starts Clients Menu and Select Software Download.

Now, You will be able to see the QPST Software Download Dialog Box.

QPST Software Download Dialog Box

Now, Click on the Phone Image Browse Button and Locate the Firmware (.hex) on your computer that you want to Flash on your Qualcomm Device (assuming you have already downloaded the firmware on the computer).

Now, Under the Boot Image, Click on the Browse button and locate the BOOT_LOADER.HEX file (comes with the firmware).

Now, Click on the Start Button to begin the Flashing process.

Once Flashing is completed you will see the Green Bar at the end of Flashing.

Now, Disconnect your Qualcomm device from the computer and restart it.

Disclaimer:

  • Please read and understand the Full Guide before flashing “Lyf Jio LF-2406S Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.