How To Use Xiaomi MI Flash Tool

Xiaomi Mi Flash Tool will only work on the Xiaomi Devices which is running on Qualcomm Chipset.

Use Xiaomi MI Flash Tool :-

Step 1: Download and extract the Xiaomi Mi Flash Tool on your computer. After extracting the Xiaomi Mi Flash Tool, you will be able to see the following files.

Step 2: Now, Open the Setup File to install Xiaomi Mi Flash Tool on your computer.

Step 3: Download and extract the Xiaomi Stock Firmware (fastboot files) on your computer. After extracting the Xiaomi Firmware, you will be able to see the similar files.

Step 4: Now, you need to install the Xiaomi USB Driver on your Computer.

Step 5: Turn Off your Xiaomi Device.

Step 6: Now, You need to boot your Xiaomi Device into the Download Mode (fastboot mode). To boot into the download mode: Press and Hold Power + Volume Down button for 6-8 seconds.

Step 7: Once you have booted into the Download Mode, you will be able to see the following screen on your device:

Step 8: Now, Connect your Xiaomi Device to the Computer using the USB cable.

Step 9: Now, Open Xiaomi Mi Flash Tool from Start Menu.

Step 10: Now, Click on the Select Button and locate the Firmware Folder.

Step 11: Now, Click on Flash Button to begin the Flashing Process.

Step 12: Once flashing process is completed, you will be able to see the Success Message in Xiaomi Flash Tool.

 

Check Also

Redmi K30i 5G Firmware

Xiaomi Redmi K30i 5G Firmware File [Stock ROM]

This time I will share a tutorial on how to Unbrick Xiaomi Redmi K30i 5G …

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.