How To

How To – Cubot Note Plus MT6737T TWRP Root

How To - Cubot Note Plus MT6737T TWRP 3.2.1

How To – Cubot Note Plus MT6737T TWRP 3.2.1

Readme Once: Take a Backup: If you are going to flash the Twrp on your Cubot Note Plus MT6737T device, then take a backup of important data such as Contacts, Call logsSMS, and other data as because your personal data will be deleted after flashing the stock firmware.

1- Backup your Call Log – Contacts – Sms – Etc With G Backup

2- Backup your current Firmware With MTK Droid Tool

3- Backup your backup IMEI NVRAM

How To Install Twrp Custom Recovery On Cubot Note Plus MT6737T:

Step 1. Make sure you installed the following Firmware.

Cubot Note Plus MT6737T Flash Files

Download the latest version of SuperSU and BusyBox.

Copy and and paste and onto microSD.

Download TWRP For Cubot Note Plus MT6737T.

Step 2. Download And Install the ADB drivers

Unrar the rar. Run “adb-setup.exe”. Hit “Y”  3 Times.

On your phone Tap on Settings –> About phone –> Tap Build number 7 times.

Developer options –> OEM unlocking enabled and USB debugging enabled.

Step 3. How To Unlock Bootloader Cubot Note Plus MT6737T

Plug your phone to PC via USB cable.

Allow the pop-up request on your phone to give your PC USB debugging.

Open CMD (command prompt).

Type the command :

adb reboot bootloader (and press enter)

Now type the next command :

fastboot oem unlock (and press enter)

Reboot in normal mode

Be patient, when you unlock the bootloader, the phone reset to the factory!

Now tap 7 times on Build number.

Then Developer options, and re-enable USB debugging.

Step 4. TO FLASH THE TWRP 3.2.1

Copy the TWRP (recovery.img) into the folder  c:\adb\

Connect your phone to the PC via USB cable.

Open CMD (command prompt) in the c:\adb\ folder

To open CMD hold the shift key and right click, then select “Open Command Window Here”.

Now type the next command :

adb reboot bootloader (and press enter)

16) Now type the next command :

fastboot flash recovery recovery.img (and press enter)


After that, the flash process is finished LONG PRESS ONTO POWER BUTTON until the phone is turned off

Hold simultaneously volume up+power buttons

Select the first line with volume up button

Hold volume down button to confirm

Onto TWRP, swipe to allow modification.

Change the default language from Russian to your language.

Return to the main menù of TWRP.

Tap Install. Tap on Select Storage. Tap Micro SDCard. Tap OK.

Tap on SuperSU zip

Swipe to confirm Flash.

Back to top button