Realme V25 RMX3475 Firmware Flash File – Android 12 S

by Asim · Friday, Nov 18 2022 4:29PM

Realme V25 RMX3475 Firmware

Realme V25 RMX3475 Stock ROM – How To Flash Guide

Realme V25 RMX3475 Firmware: Here are the most suitable ways of executing how to Flash Realme V25 RMX3475 Firmware. If you are using a Realme V25 RMX3475 this will be the best guide to install Realme V25 RMX3475 Stock ROM.

By flashing the Realme V25 RMX3475, almost all the data, components, and files present there will get wiped off, and install a fresh OS version.

Stock Rom is an operating system which set as default in your Android phones. These are developed by manufacturers to attract their customers. Every device contains its own unique and attractive features in its Stock Rom.

The Advantages Of Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Phone is stuck in a boot loop, and as the name implies, is caused by a software error. Usually the lack of a system to boot from or some other minor software bug that glitches the boot.

If your Realme V25 RMX3475 device turns to a soft brick, it may:

Keeps Rebooting;
Boots Straight Into Recovery;
Boots Straight Into its Bootloader;
Freeze at the startup screen or boot Animation;

Pre-requirements:

Supported Phone: Realme V25 RMX3475
Charge your mobile: You may no less than a half charge.
Laptop or PC.
Backup Android Phone
Download QcomDloader Tool Latest 2020
Download and install Driver

Firmware Details:

Device Name:	Realme V25 RMX3475
Type:	Full ROM
ROM Size:	880 MB
SoC:	MT6580
Os:	Android 6
Password:	Null
Gapps:	Included
Root access:	Not
Firmware Version:	China

Download	RMX3475domestic_11_A.36_2022042912400227
	RMX3475domestic_11_A.34_2022041316470468

Instructions to Install Realme V25 RMX3475 Firmware:

Download the QcomDloader Tool and USB Drivers on your PC. Follow the below Guide to install the firmware using the QcomDloader Tool.

Guide to Install Stock ROM using QcomDloader Tool:

Download and extract the QcomDloader Tool on the computer.
Download Stock Firmware.
Install Realme V25 RMX3475 USB Driver on the Computer.
Connect your device to the computer using a USB cable.
Once your device is connected to the computer, Open QcomDloader.exe.
Click on the Load Button and locate the “Realme V25 RMX3475 Firmware” on the computer.
Click on the Settings Button and Select Download Mode as Upgrade.
Now, Leave the eMMC Programmer, Raw program, and Patch0 Box as it is. But, you may need to change it, if the name of a respected file is not the same as written in the Box.
Click OK to exit the configuration interface.
Click on Start Button to begin the Flashing process.
Once, Flashing is completed you will be able to see the Green Passed Message.
Disconnect the device from the Computer and Close the QcomDloader Tool.
Congratulations! Now Restart your Mode device, and you will be able to use it.