Download Lyf Jio F120B Firmware/Flash File latest Tested:
Lyf Jio F120B stock firmware recovery: today we present the step-by-step guide to restoring the stock firmware of Lyf Jio F120B phone in any of its variants. that will allow you to return your beautiful smartphone to the original version of Android pre-installed at the time of purchase.
There are only three reasons why there is a need to flash a smartphone:
At one point, after using your smartphone for quite some time, you find that it starts to slow down its operations and performance, and to make things better, you may have to install Lyf Jio F120B stock firmware and fix software errors.
A fresh new install of stock firmware can get the best out of your smartphone and in this guide, we are going to show you how to install stock firmware on your Lyf Jio F120B black. you can also use this file with another box-like umt and miracle box.
Lyf Jio F120B Stock ROM Details:
|Device Supported:||Lyf Jio F120B|
How To Install Lyf Jio F120B Stock Firmware:
Download and install Qualcomm USB Driver on the Computer. If in case Qualcomm Drivers are already installed on the computer, then SKIP this step.
Install .xml Firmware using QFlash Tool
1: Open QFlashTool.exe on your computer.
2: Click on the Load Content Button and locate the[highlight color=”yellow”]Lyf Jio F120B stock firmware[/highlight].
3: Now, you need to Boot your device in EDL Mode. To boot the device in EDL Mode, you have to Press and Hold the Boot Key of your Device
(boot key defer device-to-device; you can google the boot key of your device) and connect it to the computer using the USB cable (example: LYF Jio F120B boot key is * & #).
4: Once your device is connected to the computer successfully, you will be able to see Qualcomm HS-USB QDloader 9008 Message on the tool.
5: Now, Click on the Download Content button to begin the Flashing process.
6: The flashing process may take a few minutes to complete depending on the size of the firmware.
7: Once the flashing process is completed, you will be able to see the Done message in the Status area of the tool.
Congratulations! Now Exit the Flash Tool and disconnect the device from your computer.